# Notifications Every notification in Homelab Manager is sent through the same pipe (`server/src/services/notify.ts`) to whichever channels are enabled under **Settings → Notifications**: Gotify, ntfy, SMTP (email), and a generic JSON webhook. All four fire for every notification below — there's no per-event channel routing, only a per-event on/off toggle (the "Notify on" list on that same page) and, for the daily ones, one shared time/timezone. Two settings apply to *every* notification regardless of what triggered it: - **Quiet hours** (Settings → Notifications → Quiet hours): while enabled and inside the configured window, a notification is held instead of sent immediately, then delivered as a single digest at the window's end time. This matters most for the real-time alerts below — the daily reminders already fire once at a time you pick, usually outside the window anyway. - **Maintenance windows** (the Maintenance page): opening one for a server, integration, or DNS provider silences the alerts that target it specifically (offline/disk-full for a server; storage, backup, and automation-failure alerts for an integration; "integration down" for that whole service type) — see the Maintenance page's own "What gets silenced" panel for the exact list. Where a trigger has a configurable threshold, that's noted in its row below; several are fixed and can't be changed from the UI. ## Daily reminders These six checks share one schedule: **Settings → Notifications → Daily reminder time** (default 08:00) and **Timezone** (default UTC). Unlike the state-based alerts further down, these **re-send every day the condition is still true** — there's no "only once" de-duplication, so an expired secret you haven't renewed yet will be mentioned again at the next day's check, and the day after that. Each one also runs once at server startup if it hasn't already run today (e.g. after an upgrade or a period offline), so you're not waiting until the next scheduled time to catch up. | Check | "Notify on" toggle | Fires when | Configured at | |---|---|---|---| | Secret expiry | *Secret expiry reminder* | Any tracked secret (API token, SSL cert, password, generic) is expired or within its own configured warning window. SSL certificates with a host:port are re-checked live first, so this reflects the real current expiry, not a stale saved date. A certificate that couldn't be re-checked live is mentioned separately, so the expiry shown may be stale. | Per-secret warning threshold, set when adding/editing that secret | | Domain expiry | *Domain registration expiring or expired (daily reminder)* | Any tracked domain registration is expired or within the warning window; every domain is re-looked-up against its registry first. A domain whose registry lookup has been failing for 3+ days is also mentioned, separately, as "may be stale." Registries that don't publish an expiry (e.g. `.de`, `.eu`) are tracked but never trigger this. | Settings → Notifications → Health checks → **Domain expiry warning** (default 30 days) | | Tailscale key expiry | *Tailscale key expiry reminder* | Any device's node key (across every enabled Tailscale integration) is within 30 days of expiring, or already expired. Devices with key expiry disabled are skipped. | Fixed at 30 days | | Docker image updates | *Docker image update available* | Any container (across every enabled Dockhand integration) has an image update available, per Dockhand's own cached update-check results — this doesn't trigger a fresh registry lookup, just reads what the Docker page itself would show. | Not configurable (reflects Dockhand's own check interval) | | Proxmox backups | *Proxmox backup failed or a guest has no coverage* | Two independent conditions, both under this one toggle: (1) a node's most recent `vzdump` backup task (across every enabled Proxmox integration) didn't succeed; (2) a VM/LXC isn't covered by any enabled backup job at all. | Not configurable | | Proxmox Backup Server verification | *Proxmox Backup Server snapshot failed verification* | Across every enabled PBS integration: any datastore has at least one stored snapshot whose verification state is "failed", or a datastore couldn't be read at all (e.g. a permissions problem). This is distinct from the Proxmox check above — PVE only knows a backup *ran*, PBS is the only place that knows whether the stored data still verifies. | Not configurable | ## State-based alerts These two run on a fixed **15-minute interval** (matching the agent's own default report interval) — not the daily reminder time above, and not user-configurable. Unlike the daily reminders, these are **state-based**: a problem is announced once when it first appears, and once more when it clears — not repeated on every 15-minute pass while it continues. A condition that can't currently be read (an integration that's down, a server whose agent hasn't reported) is held exactly as it was rather than cleared or re-announced, so a temporary read failure can't fake a recovery. On first-ever run (or right after upgrading to this feature), whatever's already failing is recorded silently as the starting baseline rather than announced all at once. | Check | "Notify on" toggle | Fires when | Configured at | |---|---|---|---| | Health — server offline | *Server offline, disk nearly full, or Synology volume/disk problem* | A server's agent hasn't reported for longer than the offline threshold. Held for the first 20 minutes after this app restarts, since agents haven't had a chance to report yet. | Settings → Notifications → Health checks → **Server offline after** (default 60 min) | | Health — disk usage | *(same toggle)* | A server disk, a Proxmox node's root filesystem or any of its storages, or a Synology volume, is at or above the usage threshold. A server that's currently offline isn't also judged on disk usage (its figures are stale). | Settings → Notifications → Health checks → **Disk usage alert at** (default 90%) | | Health — Synology status | *(same toggle)* | A Synology volume's status isn't "normal", or a disk's status/SMART result isn't normal, or it's over the bad-sector or under the remaining-life threshold. | Not configurable | | Automation — failed run | *Semaphore template or Gitea workflow run failed* | A Semaphore template's, or a Gitea repo's, most recent run status is a clear failure. A run that's still going, was cancelled, or was stopped by hand doesn't count as failed or as a recovery — it's left exactly as it was. For Gitea this follows the repo's most recent run on any workflow or branch. | Not configurable | ## Real-time alerts These fire immediately, as the triggering action happens — not on any schedule. | Event | "Notify on" toggle | Fires when | |---|---|---| | DNS record added | *DNS record added* | A DNS record is created against any DNS provider through this app (manually, or via any automated action that writes one). | | DNS record updated | *DNS record updated* | An existing DNS record is edited. | | DNS record deleted | *DNS record deleted* | A DNS record is deleted. | | Integration/DNS provider down | *Integration/DNS provider failing repeatedly* | Any integration or DNS provider adapter's calls fail a configurable number of times **in a row**. Tracked per adapter *type* (e.g. "proxmox"), not per individual integration row — with two Proxmox integrations, a streak of failures on either one counts toward the same total. Only fires once per failure streak (not on every failure past the threshold), and is skipped entirely if that type is currently in a maintenance window. | Settings → Notifications → **Alert after** (default 3 consecutive failures) | | Integration/DNS provider recovered | *(same toggle)* | The next call for that source succeeds, after a "down" alert was already sent for the current streak. | ## Digest | Notification | Fires when | |---|---| | "Notifications from quiet hours" | Once, at quiet hours' configured end time, **only if enabled and only if at least one notification was held** during the window. Bundles every held notification's title and message into one message, then clears the queue. | ## The Alerts page **Operations → Alerts** shows what these notifications are about — the problems that exist *right now* — as a list you can look at, filter, and export. It uses the same checks as the notifications above, so a problem appears there for exactly the reason it would be notified, but it differs in three ways: - It ignores the "Notify on" toggles. Turning a notification off doesn't hide the problem from the page. - Problems under a **maintenance window** are kept on the list, marked *silenced* and counted separately, instead of being dropped. - It also lists things nothing notifies about: Uptime Kuma monitors that are down, osTicket tickets that are overdue, and any integration that's failing its last few calls (before the threshold that triggers an "integration down" notification). It runs the checks live when opened (a recent result is reused for a minute), and shows what it couldn't read at the top, so a missing section means "couldn't check" and not "all clear". An alert that has an osTicket ticket (see the next section) shows its ticket number. ## Tickets in osTicket Not a notification, but it acts on the same alerts: with **Settings → Alert tickets** switched on (off by default), a problem on the Alerts page opens a ticket in osTicket. It runs every 15 minutes, starting about a minute and a half after the app starts. | Rule | What it means | |---|---| | Which problems | The severities and kinds you choose — **critical and warning, every kind** by default. Info (updates waiting and the like) is off. | | Must last | A problem must be there in **2 checks in a row** (15–30 minutes) before it opens a ticket, so a blip that fixes itself — one failed call to an integration, a monitor that flickers — never does. Can be set from 1 (at once) to 4. | | One ticket per problem | However many checks see it, once. After a ticket is open, the problem isn't ticketed again while it lasts — even if someone closes the ticket in osTicket. | | Comes back | A problem that clears and returns **within 60 minutes** is the same problem (no new ticket). After longer, it is a new one and gets a new ticket. | | Many at once | **More than 5 new problems in one check** become a single summary ticket listing them all, so one outage doesn't fill the queue. Up to 5 get a ticket each. | | Maintenance windows | A problem under one never opens a ticket. If it is still there after the window ends, it does. | | Never about osTicket | Overdue tickets, and osTicket's own calls failing, never open a ticket — it would go to the thing that is down, or add to the pile. | | Already there at switch-on | **Left alone by default**: the first check after switching on records what is wrong as the starting line, and only problems that start after it get a ticket. Can be set to ticket those too. Switching it off and on again starts a new line. | | If osTicket can't be reached | Nothing is recorded as opened; the next check tries again. A refused key, a wrong address and similar are shown on the settings page and in the Diagnostic Log. | | If something can't be read | When a check couldn't read everything (an integration was down), nothing is treated as gone, so a problem isn't called cleared just because its source couldn't be looked at. | The ticket says what is wrong, the severity, the kind, where it comes from, when it was first seen, and links back to the problem in this app. osTicket's API can't update or close a ticket, so it isn't touched again: close it in osTicket when the problem is dealt with. Every ticket opened (and every test ticket) is in the Audit Log as `alert_ticket`, and changes to the settings as `settings` / `update_alert_tickets`. "Send a test ticket" and "Check now" on the settings page use the saved settings. ## What does *not* send a notification Worth calling out explicitly, since it's easy to assume everything in the app alerts on something: - **osTicket's own tickets** — the integration lists open tickets, but there is no notification for it (e.g. nothing pings you about a newly-overdue ticket); the page and the Alerts page show them. (The other direction — an alert opening a ticket — is the section above.) - **phpIPAM sync**, **Uptime Kuma monitor/maintenance import**, and any other manual "Sync from X" action — these run when you click the button and report their result on the page itself, not via a notification. - **Test buttons** (Settings → Notifications → each channel's "Send test") send a one-off message through that one channel only, to confirm it's wired up correctly — not a real event and not affected by quiet hours. - **Consistency reports**, **Diagnostic Log**, and **Audit Log** are all read-only views you check yourself; none of them push a notification on their own (the Diagnostic Log's failures are what feed the integration-down alert above, but reading the log itself never triggers anything).