Nextcloud: its own "Cron last run" setup check (GET /settings/setupcheck,
Nextcloud 28+, found by class name) raises an alert when background jobs have
stopped; other checks that report an error are one alert, warnings are shown
on the page. The core version Nextcloud says is available is shown too. Before
28, cron and the checks are unknown, never "fine".
Alerts page: bulk Close... (one reason, written on each incident, undoable) and
Open again. Bulk Wake now leaves closed alerts alone.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Close drawer can also close the alert's osTicket ticket. osTicket's API
cannot, so this writes to its database with a separate, optional login: the
ticket is set to Closed, a note in its thread says who closed it and why, and
the closed event is recorded, in one transaction. Tables and columns are
checked first, only an open ticket is closed, and a ticket closed by somebody
else at the same moment is left alone. Summary tickets are not closed from here.
"Test closing" (Alert tickets settings) tries every write and rolls it back.
If the ticket cannot be closed the alert is still closed and the reason is
said, noted on the incident and audited.
Not run against a real osTicket: tested against a pretend database only.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Close... on the Alerts page hides an alert with no end, with an optional reason
that is also written on its incident. It opens again only if it gets more
serious than when it was closed (said once) or the problem has been gone for
half an hour; Open again brings it back at once.
Built on the snooze table (kind, severity and note columns), so everything that
holds back snoozed alerts holds back closed ones. Audit log, change log and
/api/v1 alerts carry it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Three read-only integrations, each with a monitoring page, alerts, maintenance
silencing and held-when-unreadable handling.
Nextcloud: database needing upgrade (critical), maintenance mode, and the data
disk running low; users, files and app updates with an admin app password.
NetBox: no background worker running, counts, and a list of the servers this
app manages that have no address in NetBox (a list, not an alert).
n8n: an active workflow whose last run failed, clearing when it next succeeds.
Disk messages for Immich, Paperless and Nextcloud now use the same units as
the pages that show them.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Bulk snooze: Snooze... and Wake on the ticked alerts, with undo that puts back
each alert's earlier snooze exactly.
Alert rules are judged for a server right after its agent reports, instead of at
the next 15-minute pass; only that server's rule findings change, and the check
is serialized with the pass so neither overwrites the other's state.
Photos on server and device notes: up to 12 each, shrunk in the browser,
accepted by their own bytes (JPEG/PNG/GIF/WebP, 4 MB), kept in the database and
removed with the server or device.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Three read-only integrations, each with a monitoring page, alerts, maintenance
silencing and held-when-unreadable handling.
Prometheus: scrape targets that stop answering (5 minutes, one alert per job)
and alerts that Prometheus's own rules fire (critical when labelled so).
Immich: disk under the library filling, failed background jobs, counts.
Paperless-ngx: worker/database/Redis in error, documents that failed to
import, index and sanity check, disk. Immich and Paperless also in /metrics.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New Authentik integration (read-only, every 5 minutes): version, workers,
outposts and their health, certificates and API tokens that expire, failed
sign-ins and configuration errors. Monitoring -> Authentik page.
Alerts: an outpost that serves apps has gone quiet (critical), certificate or
token about to run out (critical close to it), no worker, failed sign-ins,
configuration errors. Held by maintenance, held when unreadable, in /metrics.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New Jellyfin integration (read-only, every 2 minutes): version, restart wanted,
streams and transcoding, failed scheduled tasks, item counts, failed sign-ins.
Monitoring -> Jellyfin page with a peak-streams history, three alerts, /metrics.
When Jellyfin runs on a managed server, an update run asks first if people are
streaming (409 "watching" unless startAnyway), and a patch plan waits up to two
hours for them before updating that server.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Duplicati reports each operation to a secret address (its own send-http-url option), so
nothing calls Duplicati and no password for it is kept. Each machine is a source; each job
is learned by name and shows its last result, duration, size, changes and a history.
A failed run is a warning (critical from the second in a row); one that has not succeeded
for longer than expected (per job, 2 days by default) is a warning, critical at three
times that. Maintenance on the machine's server silences them; /metrics series added.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
With Dockhand connected, an image the app recognises (about 20 with a health endpoint of
their own, plus a few dozen web UIs) is offered as an endpoint check on that app's own
health address, with what a good answer looks like set up as a value check: Immich's ping
says pong, Nextcloud's status.php is not in maintenance, Gitea's health says pass, and so
on. Asked on the Docker host's address at the port the container publishes. Container
ports are now read from Dockhand's list.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
From Dockhand, on the health pass: a container that keeps restarting (critical, with
its exit code), one whose own health check fails, one that stopped unexpectedly, one
created and never started for an hour, and a Docker host Dockhand cannot reach. A stop
is only news when it was seen happen, so stacks switched off long ago stay quiet.
A Leave alone button on the Docker page and a list in Settings; on by default.
Also fixes a date-dependent storage-forecast test that pinned its clock while the code
under test reads the real one.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
For a one-person homelab, "on call" is when you can be reached. Settings ->
Notifications -> When -> Away holds notifications while you are away (a banner on
every page says so) and sends one digest when it ends, at its time or when you say
you are back. Critical alerts can still come through. Quiet hours get the same
"still send critical alerts" option. Escalation steps marked to send in quiet hours
are sent while away too. What is held for one reason is not released while the
other still holds it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Monitoring -> Service levels: a target (99.9 %) on an endpoint check, a server or an
integration, measured over calendar months. Shows the figure, downtime used, the
error budget left, and how the last six months went. 80 % of the budget used is a
warning and an overspent budget a critical alert. Endpoints are measured day by day,
servers and integrations to the minute from the audit log.
The report page gains Quarter and Year (same figures, with a Service levels section),
and two settings send the quarterly and annual report after the month that ends them.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Each server's CPU load and memory use get a baseline for every hour of the week
(median and robust spread over up to ten weeks, four needed). A clearly high last
hour that never dropped back toward normal is a warning; everything else stays
quiet. Server History -> Trends draws a usual line and band. Setting under
Notifications, on by default.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New UPS integration (NUT or SNMP v2c, read only). Monitoring -> UPS shows charge,
runtime, load and mains voltage with history and the times mains power was lost.
Mains lost and a nearly empty battery are critical alerts; battery to be replaced
and a heavy load are warnings. The UPS is a node in the dependency map and counts
as down while on battery, so servers that go offline with it are folded under its
alert; the page lists what is on it in the order to shut it down. /metrics series
and docs added.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A web check can read a value out of a JSON answer (power.now, state,
data.result[0].value[1]) and judge it: below, above, equal to, contains, is there.
The value read is shown on the Endpoints page, charted under History, exported as
homelab_endpoint_value and in the read API. A check can also send one header (a
token), stored encrypted, never returned, and not forwarded to another host on a
redirect.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Settings -> Data -> Storage measures the database, backups and sessions and every
table (size, rows, growth, how long it is kept, how far back it reaches), and flags
histories that are not being trimmed or have no limit.
Event webhooks now keep a delivery log (last 100 per webhook, 14 days): what was
sent, how it went, the message itself, and Send again, which resends it exactly as it
was (same id and signature). Resends are audited and in the Change log.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- A switch (off by default) under Settings -> Notifications -> Who hears what
- ntfy gets buttons (three for one alert, one link for several); phone push gets two buttons handled by the service worker; Gotify, email and the chat webhook get the link as text; escalation messages carry them too
- Each link is a signed token for the alerts in that one message only, good for 24 hours, for three actions; opening it changes nothing, only a POST acts; everything is audited as "from a notification link"
- Docs updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- A card on the incident page, and GET /api/incidents/:id/before and /api/v1/incidents/:id/before: what the app knows happened in the 30 min to 24 h before an alert began (audit log, maintenance windows, update runs and patch plans, other alerts, a step in the server's own figures), scored by how related, what kind and how close
- A host going down is shown once; Likely, Possible and Background; at most ten
- Docs and roles updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- New docs/ folder: SSO, API, Prometheus and Grafana, webhooks, heartbeats and calendar, how monitoring works, and an index; the old root API.md is split across them
- Read API: alerts carry snoozedUntil
- DATABASE.md: table and migration counts, indexes, relations, integration config, settings and internal flags, delete rules, retention
- ROLES.md: the sidebar table rebuilt from the menu
- NOTIFICATIONS.md, INTEGRATIONS.md, BACKUP.md, AGENT_UPDATE.md: what had drifted
- README: links to the guides; accounts cannot be deleted in the app
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Monitoring -> Alert rules: CPU, memory, disk use and disk temperature limits with a time, severity and scope (all, one server, a tag); try before saving; findings are ordinary health conditions
- Proxmox storages and Synology volumes are written down on each health pass (hourly, 400 days) and forecast like server disks: badge and history chart on the pages, alert, digest line, /metrics gauge
- Snooze an alert until a time; held back like maintenance, messages held, announced once again if still there when it ends
- Docs updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- The open jobs about a server (or device) are listed on its page, with a line to add another already about it and a box to tick one off with Undo
- GET /api/todos takes ?targetType=&targetId= to list only those about one thing
- README and ROLES updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Racks page and a network diagram (UniFi tree with servers, printable)
- Notes on servers and devices; To do list shown in Coming up and My work
- Agents report the operating system (Linux 7, Windows 6); end-of-life badge and alert
- Suggested dependencies from where a service is reached
- Nginx Proxy Manager integration: proxy hosts page, certificate and host alerts, suggested checks
- Home Assistant integration: watch chosen entities, history chart, limit and unavailable alerts
- TimeChart gets a "value" scale that fits negatives; docs updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
History: server load, memory and disks are also kept as hourly (four months) and
daily (over two years) averages with lowest and highest; endpoint answers as
hourly (four months) beside the daily figures. Charts ask for 24 hours to a year
and are drawn from whichever is fine enough. A disk that two weeks call flat is
looked at again over ninety days for the forecast. Built once from what is kept.
One chart: TimeChart replaces the sparkline and the multi-line chart: hover and
arrow-key readout, a lowest/highest band, gaps shown as gaps, the same ranges
everywhere and the choice remembered. Used for server trends, comparing servers,
a check's availability and answer times (Endpoints > History) and a server's
availability.
Read API: /api/v1 (servers, metrics, alerts, incidents, inventory, network,
endpoints and their history, maintenance) with personal read-only tokens made
under the user menu: shown once, hashed, 30/90/365 days or none, ten at most,
removed with their owner. GET only. Documented in API.md.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
UniFi: the controller's client list is matched to servers by IP address, so a
server is connected through a switch or access point (and port). That is a
dependency made by itself, shown on the server page, the Network devices page
and the Connections map. IP Addresses can sync the devices' addresses.
A server's page is split into Overview, Health, Network, History, Tasks and
Settings, by ?view=; alerts link to the section they are about.
My work lists what has your name on it: alerts you have, maintenance you
started (extend, end with undo) and update runs you started, with a badge.
Settings has a search box (and the command palette lists every setting).
Removing a dependency, admin link, runbook, hand-made IP address, port opening
or restore test is undone from the message instead of asked about first.
Two backup tests used a fixed date and failed as days passed; they follow the
real clock now.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A UniFi controller (API key on Network 9+, or a read-only local login on any
version) is read every five minutes. Its switches, access points and gateways
are kept with state, IP, uptime, firmware and uplink; its networks and Wi-Fi
names beside them (passphrases are never read). Nothing is written to the
controller.
Network > Network devices lists them. Devices are a new node type in the
dependency map: uplinks become dependencies by themselves, others can be
written by hand. A device offline past a limit is an offline alert, folds what
depends on it, can be silenced with maintenance and have runbooks.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Flapping: an alert raised three times within an hour is announced once as
flapping, its further raise/clear messages are held until it has been calm
for an hour, and one message then says whether it is still active. Event
webhooks still hear everything. The state survives restarts.
Alerts > Noise lists the alerts that keep coming back (7-180 days): how often,
how long, most in an hour, and a hint on what helps.
Bulk actions on Alerts (acknowledge, remove acknowledgement, silence), Servers
(tag, silence, runs on) and Inventory (location and dates, print labels). Each
reports what it left alone and why, and has an Undo on the toast.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Patch plans (Updates -> Patch plans): updates on a schedule, one server at a time, each by an
ordinary update run, stopping at the first failure by default, silencing what depends on a
server while it is updated, with one message at the end.
Monthly report (Operations -> Monthly report, and optionally a message on a day of the month):
availability, incidents, updates, restore tests, backups and renewals for a calendar month,
printable. Backed by daily endpoint figures and a record of renewals.
New ports: the first report with ports is the baseline; a TCP port that begins listening later and
is not noted on the server's Ports card is a warning, cleared by Mark as expected.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Notifications gains Alert tickets, Display gains Badge colours, and a new Data tab holds Backup,
Logs and Cache. Domains is the 'Domain names' tab of DNS. Old addresses redirect; the docs, the
Privacy page and the links from alerts and the agenda name the new places.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Dependencies become a view of the Map (graph with the editor under it), Sessions the
'Signed in now' tab of Users, the Audit Log the 'Raw audit log' tab of the Change log, and the
Diagnostic Log the 'Call log' tab of Integrations (admins). Backup coverage and Proxmox Backup
move to a new Backups group. Old addresses redirect; a shared ViewTabs component does the tabs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Heartbeats: a cron job or script calls /api/heartbeat/<token> (and /start, /fail); the app
alerts when the call is late or the job says it failed. Coming up: one agenda of everything
dated (expiries, warranties, end of support, planned and recurring maintenance, restore tests,
waiting updates), with a dashboard card and an iCalendar feed behind a share link. Suggested
checks: web ports and certificates the app already knows about, added with a click.
Menu: Incidents become Alerts -> History (old /incidents links redirect); new Monitoring group
(Endpoints, Heartbeats, Uptime Kuma); osTicket under Automation, Admin Links under
Infrastructure, Generator under Administration. Also makes the restore-test metrics test follow
the real clock.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Both sources are off until switched on under Settings, Sign-in. The server asks only
gravatar.com (by a hash of the email) and the identity provider's own host, accepts only
small PNG/JPEG/WebP/GIF, keeps each picture for a day and serves it from /api/avatars/<id>,
so browsers never contact either. Shown in the user menu and on the Users page, with initials
as the fallback; the Privacy page says when it is on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Inventory: end of support and replacement cost per asset; a Lifecycle page showing what ages out year by year and what replacing it will cost; support ending within 90 days in the weekly digest
- Lists: a shared empty state saying what is missing, why, and the one thing to do; "nothing matches" with a clear button; skeleton rows instead of empty-looking lists while loading
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Endpoints: HTTP, TCP and TLS checks with answer time, uptime and certificate expiry; failures and expiring certificates become alerts and notifications; linked to a server for maintenance and tags
- Restore tests: record when a backup was restored and how it went; failed tests always alert, overdue ones with a limit set; shown on the Backup coverage page
- Change log: one filterable timeline made from the audit log and the incident record
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Agents (Linux 6, Windows 5) note each check they couldn't make and why; the server page turns that into tips and fixes, including when the agent is behind
- Linux --prepare leaves its notes for the report; a missing prepare step is itself noted
- Services to ignore are set per server from the Host health card (names or * patterns), applied on the server so alerts and /metrics drop them at once; saving alert limits keeps the list
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Dashboard: a banner that answers "is it fine?" (headline, root cause, kinds of problem, worst few); cards with a problem come first in their row
- Phone: Alerts, Updates and Inventory rows become compact cards, finger-sized buttons, Alerts drops its figure row; scanned inventory labels get an Edit button
- Command palette: acknowledge alerts, update a server, print a label, open hardware, "What depends on ...?"
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Routing: rules pick channels by kind, severity and server tags (first match wins, none = nobody); mixed batches split per route; recoveries follow their alert; quiet-hours digest keeps each notification's audience
- Push: each subscribed browser can ask for a minimum severity and some kinds
- Escalation: up to three timed steps re-notify alerts nobody has acknowledged, through chosen channels and an optional extra email; an acknowledgement stops them
- Fix ntfy: titles with an em dash made every ntfy send fail (header not Latin-1); now RFC 2047 encoded
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Map: a Dependencies view showing what would go down with a picked box and what it relies on
- Maintenance: lists what depends on a target and can silence those too (same time, audited); the recurring form and update drawer show the same note
- Alerts: a headline on where things stand, held-back alerts nested under their cause, severity edge on rows; caused-by now carries the explaining alert's id
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Dependencies: servers and integrations can depend on each other; alerts are folded under the root cause, and a failure explained by something down isn't announced
- Web push: hand-written VAPID and RFC 8291 encryption, per-device subscriptions, a fifth notification channel, service worker handlers
- Inventory: maker/model/serial from the agents fill blank fields, "Refresh from agent", QR label printing and ?asset= deep links
- Windows agent (v4) reports failed services, disk health, Storage Spaces pools and hardware identity; Linux agent (v5) reports hardware identity
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Share links can open a status page: an admin picks servers, integrations and Uptime Kuma
monitors and names them; the public sees only those names, Working / Not working /
Being worked on / Can't tell, an optional message and the 30-day figure (share_links.kind/
title/message and status_items, migration 0033). A status address doesn't open the wall and
the other way round; Uptime Kuma is asked at most every 30 seconds
- Grafana dashboard built from code (download in Settings -> API and webhooks); a test checks
it only uses series /metrics serves
- Tests and docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Alerts can be acknowledged (note, assignee, duration); acknowledged alerts are left out of what
needs attention (sidebar, dashboard strip, cards) but stay raised and counted by /metrics
- Incidents: each time an alert is raised and goes away is recorded (alert_acks, alert_incidents,
incident_notes, migration 0032), with a timeline of acks, maintenance, changes, update runs,
related alerts and notes; Incidents page and a digest section
- Backups of Homelab Manager's own database: daily checked VACUUM INTO copies, retention, download,
check, upload, delete, and restore staged and applied at start-up before the database opens
(pre-restore copy kept); alerts and /metrics for stale or failing backups
- Docs: README, BACKUP, DATABASE, NOTIFICATIONS, ROLES, API; tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Backups: a guest whose newest backup is older than its limit is an alert (backup kind),
in the daily backup message, the digest and /metrics (homelab_backup_guests, ..._last_age_seconds)
- Per-server thresholds (servers.thresholds, migration 0030): offline minutes, disk percent,
forecast window, backup age, and per-disk limits or "leave alone"; applied everywhere the
global ones were; saving clears the alerts cache
- Update runs (update_runs, migration 0031): Update... on the Updates page puts the server under
maintenance, runs a Semaphore playbook limited to it, waits for the host to report, and
reports what is left and whether a restart is due; poller survives restarts
- Notification toggle for update-run results; tests and docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Linux agent v4: failed systemd services, SMART disk health, ZFS pool state, pacman updates;
SMART/ZFS and self-update run in the ExecStartPre=-+ step outside the sandbox
- Server: hosts' health stored (servers.host_health, migration 0029), alerts under a new
"Failing services" kind plus disk/ZFS alerts, Host health card, Prometheus series
- Agent self-update (Linux v4, Windows v3): admin switch on the Servers page, checksum-verified
download, atomic replace; GET /api/agent/report/update
- homelab_server_disk_days_to_full in /metrics
- Tests (server, real PowerShell against a fake server) and docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Export CSV for the small tables that had none (reads the table as shown)
- Servers page shows a skeleton while loading instead of "No servers registered yet"
- Recurring maintenance schedules can be edited (PUT /schedules/:id)
- A server can be set to run on nothing (servers.no_parent, migration 0028)
- Linux agent v3: package-manager question runs in ExecStartPre=-+ outside the sandbox,
with --prepare-updates and --check-updates modes
- Docs: README, DATABASE, AGENT_UPDATE
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Runbooks: notes per server/integration, shown next to matching alerts
- Backup coverage page across Proxmox and PBS, with a digest section
- Hardware inventory with warranty, power and running cost
- Authentik group to role mapping with preview and safeguards
- /metrics (bearer token) and signed outgoing event webhooks
- Docs: README, DATABASE, NOTIFICATIONS, ROLES and new API.md
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Weekly digest through the notification channels: alerts now, a week of uptime, what happened, disks
heading for full, expiring secrets and domains, updates waiting, planned maintenance. Off until switched
on in Settings -> Notifications; Preview and Send it now there. Setting key 'digest'.
- Agents say their version in every report (Linux and Windows scripts are version 2); the server compares
it with the scripts it serves and marks agents that are behind on the Servers, server and Updates pages.
servers.agent_version, migration 0026.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- AGENT_UPDATE.md: when an agent needs updating, how (reuse the stored token or rotate it), how to do many
servers, how to check it worked, and why a server can stay 'not reported'.
- Windows agent: the Windows Update search runs in its own process with a 150 s limit (the scheduled task is
stopped after five minutes), a failed search is not retried for an hour, and the cache is read the same in
PowerShell 7 and Windows PowerShell 5.1.
- Linux agent: says in the journal when the package manager could not be read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Servers can say what they run on (or it is worked out from the Proxmox node); when the host is
down the guests' offline alerts fold under it: held back, not counted, not notified, still recorded.
- Recurring maintenance schedules made into ordinary windows a week ahead (maintenance_schedules).
- Run a Semaphore template limited to a server from its page or an alert, and watch the run.
- Agents report pending updates (apt, dnf, zypper, Windows Update); an Updates page lists them.
- Migrations 0024 and 0025.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Table search, status, tag and sort live in the address; Save view pins one as a favourite.
- Dashboard cards can be moved and hidden per user (users.dashboard_layout, migration 0022).
- Compare two to four servers' load, memory or disk on one chart.
- j/k move through table rows that open a detail panel.
- Share links open a read-only wall without signing in, numbers only or with names
(share_links, migration 0023); the wall is split into a shared view over two data sources.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Dashboard card on what changed since the user pressed Got it (users.last_looked_at,
migration 0021), folding each problem and its recovery into one line.
- Uptime ribbons on servers and integrations, built from the audit log; integrations'
failing/working-again moments are now recorded.
- Timeline of running and scheduled maintenance windows on the Maintenance page.
- TimeAgo component: relative times with the exact time in the chosen format on hover.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>