Each server's CPU load and memory use get a baseline for every hour of the week
(median and robust spread over up to ten weeks, four needed). A clearly high last
hour that never dropped back toward normal is a warning; everything else stays
quiet. Server History -> Trends draws a usual line and band. Setting under
Notifications, on by default.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Settings -> Data -> Storage measures the database, backups and sessions and every
table (size, rows, growth, how long it is kept, how far back it reaches), and flags
histories that are not being trimmed or have no limit.
Event webhooks now keep a delivery log (last 100 per webhook, 14 days): what was
sent, how it went, the message itself, and Send again, which resends it exactly as it
was (same id and signature). Resends are audited and in the Change log.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
History: server load, memory and disks are also kept as hourly (four months) and
daily (over two years) averages with lowest and highest; endpoint answers as
hourly (four months) beside the daily figures. Charts ask for 24 hours to a year
and are drawn from whichever is fine enough. A disk that two weeks call flat is
looked at again over ninety days for the forecast. Built once from what is kept.
One chart: TimeChart replaces the sparkline and the multi-line chart: hover and
arrow-key readout, a lowest/highest band, gaps shown as gaps, the same ranges
everywhere and the choice remembered. Used for server trends, comparing servers,
a check's availability and answer times (Endpoints > History) and a server's
availability.
Read API: /api/v1 (servers, metrics, alerts, incidents, inventory, network,
endpoints and their history, maintenance) with personal read-only tokens made
under the user menu: shown once, hashed, 30/90/365 days or none, ten at most,
removed with their owner. GET only. Documented in API.md.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
UniFi: the controller's client list is matched to servers by IP address, so a
server is connected through a switch or access point (and port). That is a
dependency made by itself, shown on the server page, the Network devices page
and the Connections map. IP Addresses can sync the devices' addresses.
A server's page is split into Overview, Health, Network, History, Tasks and
Settings, by ?view=; alerts link to the section they are about.
My work lists what has your name on it: alerts you have, maintenance you
started (extend, end with undo) and update runs you started, with a badge.
Settings has a search box (and the command palette lists every setting).
Removing a dependency, admin link, runbook, hand-made IP address, port opening
or restore test is undone from the message instead of asked about first.
Two backup tests used a fixed date and failed as days passed; they follow the
real clock now.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Flapping: an alert raised three times within an hour is announced once as
flapping, its further raise/clear messages are held until it has been calm
for an hour, and one message then says whether it is still active. Event
webhooks still hear everything. The state survives restarts.
Alerts > Noise lists the alerts that keep coming back (7-180 days): how often,
how long, most in an hour, and a hint on what helps.
Bulk actions on Alerts (acknowledge, remove acknowledgement, silence), Servers
(tag, silence, runs on) and Inventory (location and dates, print labels). Each
reports what it left alone and why, and has an Undo on the toast.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Dashboard: a banner that answers "is it fine?" (headline, root cause, kinds of problem, worst few); cards with a problem come first in their row
- Phone: Alerts, Updates and Inventory rows become compact cards, finger-sized buttons, Alerts drops its figure row; scanned inventory labels get an Edit button
- Command palette: acknowledge alerts, update a server, print a label, open hardware, "What depends on ...?"
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Export CSV for the small tables that had none (reads the table as shown)
- Servers page shows a skeleton while loading instead of "No servers registered yet"
- Recurring maintenance schedules can be edited (PUT /schedules/:id)
- A server can be set to run on nothing (servers.no_parent, migration 0028)
- Linux agent v3: package-manager question runs in ExecStartPre=-+ outside the sandbox,
with --prepare-updates and --check-updates modes
- Docs: README, DATABASE, AGENT_UPDATE
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Runbooks: notes per server/integration, shown next to matching alerts
- Backup coverage page across Proxmox and PBS, with a digest section
- Hardware inventory with warranty, power and running cost
- Authentik group to role mapping with preview and safeguards
- /metrics (bearer token) and signed outgoing event webhooks
- Docs: README, DATABASE, NOTIFICATIONS, ROLES and new API.md
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Weekly digest through the notification channels: alerts now, a week of uptime, what happened, disks
heading for full, expiring secrets and domains, updates waiting, planned maintenance. Off until switched
on in Settings -> Notifications; Preview and Send it now there. Setting key 'digest'.
- Agents say their version in every report (Linux and Windows scripts are version 2); the server compares
it with the scripts it serves and marks agents that are behind on the Servers, server and Updates pages.
servers.agent_version, migration 0026.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Table search, status, tag and sort live in the address; Save view pins one as a favourite.
- Dashboard cards can be moved and hidden per user (users.dashboard_layout, migration 0022).
- Compare two to four servers' load, memory or disk on one chart.
- j/k move through table rows that open a detail panel.
- Share links open a read-only wall without signing in, numbers only or with names
(share_links, migration 0023); the wall is split into a shared view over two data sources.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The wall clock, date line and 'Updated' footer used the browser locale, and the
Proxmox backup tasks and PBS page used toLocaleString. They now use the display
settings via new formatDate/formatTime helpers.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A star beside each page in the sidebar pins it under "Favourites" at the top of
the menu; the list is saved with the user (users.favorites, migration 0020), so
it follows them to any browser, is offered first in the search box, and can be
changed from there too. A button at the foot of the sidebar, or the [ key,
narrows it to a strip of icons, where a group's pages open in a small menu
beside its icon and the alert and maintenance counts stay visible; the choice
is kept per browser and applies only on wide screens. Menu text on a coloured
(environment) sidebar is full strength for contrast, and menu badges sit in
line on a phone.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Tables stack into labelled cards on a phone. Green, red and amber badges carry
a check, cross or triangle as well as their colour. Pages inside a menu group
show a breadcrumb, with the thing's name on a server's page. Integrations are
cards with an Open button and a live status (working, failing, not checked yet,
disabled). Agent-reported servers keep a short history of load, memory and disk
use (migration 0019, one sample per ten minutes for 35 days) and show it as a
Trends card with a days-until-full forecast for a filling disk.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Feedback: toasts confirm common actions, and a page's error or success message
that appears out of view is also shown as a toast. Icons: the tab, app and
home-screen icons are the house from the logo; a dev instance gets a coloured dot
on its tab icon. Tables: Secrets, Admin Links, IP Addresses and Alerts share one
toolbar (search, filters, row count, actions, Export CSV); twelve more tables get
a multi-word search box; long tables keep their column headings in view on wide
screens. Density: Compact / Normal / Roomy in the user menu, remembered per
browser.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Setting ENVIRONMENT_NAME (and optionally ENVIRONMENT_COLOR, a name or hex
value) gives the sidebar that colour, adds a name badge next to the title and
on the sign-in page, and prefixes the browser tab title, so a dev copy can't
be taken for production. Unset, nothing changes. The colour is validated to a
plain #rrggbb before it reaches the page's styles. A public
GET /api/environment lets the sign-in page use it too.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Name lists now live in settings instead of the web bundle. Admins edit them under
Settings -> Names (add/remove names, create/rename/delete lists, reset a built-in
list). Names are folded to hostname-safe form (a-z, 0-9, hyphen) and validated on
the server; saves are audited.
Adds Swedish boy names, Pixar, Norse mythology and Astrid Lindgren lists, and
lengthens the Swedish girl and Disney lists. "Mixed" is now every list with each
name counted once.
Admins can preview and import the most common Swedish names from Skatteverket's
open "Namn pa nyfodda" data (girls or boys, latest 1-5 full years); nothing is
stored until the editor is saved. The old comment that credited SCB statistics is
gone: SCB stopped publishing name statistics after 2023.
Privacy page, README and ROLES updated for the new outbound call and page.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
All 31 native dialogs (27 confirms, 4 text prompts: ignore reason, two
"exclude a range" boxes, tag rename) now use the app's own Tabler-styled
modals, which follow the light/dark theme.
A small promise-based API (utils/dialogs.ts: confirmDialog, promptDialog)
and a single DialogHost mounted once in App mean call sites just await
it in place of the browser call - no hooks or per-page modal state. Every
call site was already in an async function, so each is a one-line swap.
Each dialog now has a title and a main button that names the action
("Delete", "Stop now", "Run now") instead of "OK", with destructive ones
in red. Escape cancels, Enter confirms, Tab stays inside the dialog, the
page behind stops scrolling, and focus returns to the button that was
clicked. Destructive dialogs start with focus on Cancel so a stray Enter
can't delete anything. Text prompts pre-select their default and disable
the main button until something is typed where it's required, and still
tell cancelling (null) apart from confirming an empty box (""). Clicking
the backdrop cancels, but releasing a text selection over it doesn't.
Dialogs asked for together appear one after another.
Verified in a browser on a test page using the real component and the
app's real stylesheet: Escape, Enter, Tab trapping, focus handling,
required and optional prompts, backdrop clicks, queuing, scroll lock and
dark mode. The 31 call sites themselves were checked by search and
typecheck rather than clicked through in the logged-in app.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Entries were stored in UTC without a zone marker and the Audit and
Diagnostic Log pages read them as local time, so every entry showed
shifted by the viewer's UTC offset (two hours early in Sweden). A shared
parseDbTimestamp() now reads them as UTC, and replaces the inline
workaround the Consistency page had.
The Audit Log never displayed an entry's details at all, so adding an
admin link showed only "server #1". Link entries now carry the server
name and the label/URL, and a new Details column shows them, along with
things like a port scan's address and range. Entries made within the
same second are now ordered by id instead of arbitrarily.
A domain's "Check now" was the one user-triggered action that wasn't
audited; it is now.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Both places you add an admin link - a server's own Admin Links section
and the Operations > Admin Links summary page - now offer a "fill from
a known port" dropdown once a server is picked, listing its
agent-reported and manually-noted ports (the same data the Ports
page/card shows). Picking one fills in the URL as
http(s)://<hostname-or-IP>:<port>, guessing https for a handful of
common admin-panel ports, and fills the label too if it's still empty.
The URL field stays fully editable either way.
Shared the address/label logic in a small adminLinkUrl.ts helper used
by both pages. No server-side changes needed - built entirely on the
existing per-server ports and detail endpoints.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reports a Windows machine the way the Linux agent does, replacing the
"planned" stub in agent/windows: scheduled tasks plus hostname, IPv4
addresses, CPU model/cores/current load, memory, every fixed disk, and
TCP/UDP listening ports with the owning process (which feed the Ports
card, localhost-only listeners included).
Scripts (plain ASCII by design -- they are downloaded as text and Windows
PowerShell 5.1 reads BOM-less files as ANSI):
- report-tasks.ps1: collects and POSTs to /api/agent/report. Works in
Windows PowerShell 5.1 and PowerShell 7. -DryRun prints the JSON.
Microsoft's own \Microsoft\ tasks (hundreds) are left out unless
INCLUDE_MICROSOFT_TASKS is set. Triggers are turned into readable text
("Weekly on Mon, Wed at 03:00", "At logon", "..., repeating every 15 min").
Self-signed certificates work via API_INSECURE on both PowerShell
versions (they need different mechanisms).
- install.ps1: elevated only; downloads the agent to ProgramData, writes
agent.json with permissions locked to SYSTEM and Administrators *before*
the token goes in, and registers a SYSTEM scheduled task (every 15 min
plus at startup with a 2 min delay). Reinstalling replaces the task.
- uninstall.ps1: removes the task and only the files the agent installed.
Server: accepts schedule_type "windows_task"; a server can be registered
as Windows (Add a server has an operating system choice); an agent's
reported os_type ("linux"/"windows", anything else ignored) corrects the
stored one. The Servers page shows the right install and uninstall
command for each OS (Windows PowerShell 5.1 one-liners, with a self-signed
variant and a note about PowerShell 7), and Windows tasks are labelled
"Windows scheduled tasks". The Linux commands are unchanged.
Verified on this Windows machine, in both PowerShell 5.1 and 7:
- Real dry runs found and fixed bugs before anything shipped: tasks and
ports came out as one nested item (return , $out wrapped twice), integer
keys in an ordered dictionary index by position (wrong weekday names),
and generic "Trigger" labels.
- End to end against the real agent-report router: HTTP, self-signed HTTPS
refused by default and accepted with API_INSECURE, wrong token gives a
clear one-line error and exit 1, and Swedish letters plus a euro sign
survive JSON -> UTF-8 -> HTTP -> SQLite.
- 35 checks on trigger/action/duration descriptions, 20 on the installer's
building blocks (task parts built but not registered, credentials file
content and ACL, download over HTTP and self-signed HTTPS), 18 on the
server rules, and the generated one-liners run through PowerShell's
parser. The documented one-liners were run through iex and stop at the
administrator check without changing anything.
- Found that PowerShell 7 ignores the ServicePointManager certificate
override, so the installer's own download now uses -SkipCertificateCheck
there.
NOT verified: the elevated install itself. Registering a SYSTEM scheduled
task needs elevation and changes the machine, so it was not run: the task
registration, that the repeating trigger really runs indefinitely, and
the agent running as SYSTEM under Task Scheduler have not been exercised.
Windows 10 / Server 2016 or newer is assumed; older is untested.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New Settings > Tags tab (admin) listing every tag -- ones servers use and
ones added ahead of time -- with how many servers carry each:
- Add a tag before anything uses it, optionally with a colour. Such tags
are offered as one-click "Add:" chips (and datalist suggestions) when
tagging a server, so the same word gets spelled the same way everywhere.
- Give any tag a colour of your choosing, in use or not, or reset it to the
automatic one. Changes are drafted with Save/Cancel rather than saved as
the picker drags. Colours show on the Servers page, its tag filter bar,
the detail page and the editor, and update everywhere without a reload
through one shared cached colour map.
- Rename a tag; every server that has it is rewritten. Renaming to a name
that already exists merges the two after a confirmation naming what will
happen; the target keeps its own colour unless it had none, and a server
carrying both ends up with one.
- Delete a tag, which removes it from every server that has it, with a
confirmation stating how many.
Tags still live on the servers (servers.tags); a new tag_definitions table
holds only what a server can't: existence before use, and a colour. A
defined tag stays listed until an admin deletes it, even with no servers.
Rename and delete change the servers and the catalogue in one transaction
so they can't disagree. Only servers that actually carry the tag are
rewritten and counted -- an earlier draft also counted servers whose tags
merely weren't in sorted order, which the tests caught.
Reading the list and colours is open to everyone signed in (needed to draw
tags anywhere); changing the catalogue is admin-only, while tagging a
server stays an operator action. Names go through the same normalisation
as before, colours must be #rrggbb, and every change is audit-logged.
New table tag_definitions (migration 0013).
Verified with 44 backend checks (list/counts, roles, create/adopt/
duplicate/rejects, colour set/reset, rename incl. defined, undefined and
unused tags, merge colour rules and both-sides servers, delete, audit, and
that normal tagging still works afterwards) and in a browser against the
real routers: add with colour, set/reset a colour and see it change on the
Servers page live, merge with confirmation, delete, and the error path.
Not clicked through: the quick-add chips inside the tag editor on a
server's detail page (typechecked; same colour code as the rest).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The API already returned Gitea's updated_at for every repo but the page
never displayed it. The Gitea table now has a sortable "Last updated"
column with a relative age ("3 d ago") over the exact date/time (in the
app's configured date format), and the CSV export includes it.
Gitea only exposes a single updated_at per repository (there is no
separate last-push time), so this is Gitea's own notion of "updated".
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Servers can be tagged (prod, media, rack-1, ...) for grouping. Operators
and admins edit tags inline on a server's detail page; the input suggests
tags already used on other servers so the same word ends up spelled the
same way everywhere. Tags show as chips that keep one colour per tag, on
the server cards, in the Manage table (and its CSV export), and on the
detail page, where each chip links to the Servers list filtered by that
tag. The Servers page has a tag bar with counts; picking several tags
narrows to servers that have all of them. The filter lives in the URL, so
it survives a refresh and can be linked to. Tags are also matched by the
global search.
Tags are normalized on the server (trimmed, lowercased, spaces become "-",
duplicates merged, sorted); letters in any language are allowed, plus
digits and - _ . : /, at most 30 characters and 12 per server. Invalid
input is rejected with a message naming the offending tag, and nothing is
saved. Changes are audit-logged with the before and after lists.
Stored as a JSON column on servers (migration 0010). Every server response
now returns tags as an array, and the shared response shaping strips the
token hash in one place instead of five.
Verified with 27 backend checks (normalization edge cases including
Swedish letters, roles, validation, search, audit, PATCH/detail/list
shapes) and by driving the real Servers and detail pages against the real
router in a browser (filtering, editing, invalid tag, viewer view). Real
dev database mtime untouched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Rebooting Proxmox or patching a server triggered failure/offline alerts
you then had to dismiss. A maintenance window silences alerts about one
server, integration, or DNS provider for a chosen time. New Maintenance
page (start with a duration and optional reason, end early, see what's
silenced and what isn't) and a banner in the app shell so every signed-in
user can see what is currently silenced. Starting/ending is operator-only
and audit-logged; starting one on a target that already has a window
restarts its clock instead of stacking.
Silenced for the target: server offline/disk alerts, Proxmox/Synology
storage and health alerts, Proxmox backup alerts, and "integration down"
alerts. Not silenced: expiry and update reminders, DNS change notices.
The design goal is that this cannot hide a real outage:
- Every window has a required end (5 min to 7 days); there is no
open-ended option, so a forgotten window expires by itself.
- A silenced problem is deliberately NOT recorded as "known". If it is
still present when the window ends it alerts then, as new. A problem
that was already alerted before the window stays known, so it isn't
repeated, and is reported cleared only after the window ends.
- Failure alerts keep counting failures during a window without marking
themselves alerted, so an outage that outlasts the window alerts on the
very next failed call.
Known limitation, stated on the page: integration-failure alerts are
tracked per service TYPE (all "proxmox"), not per configured instance, so
a window on one Proxmox integration also silences a failure on a second
Proxmox integration while it's open. Fixing that means threading the
integration id through every adapter and the diagnostic log, which is a
much larger change than this feature.
Also moved the API-error-message helper out of Secrets.tsx into a shared
util now that two pages use it. New table maintenance_windows (migration
0008).
Verified with 44 checks: the condition-key-to-subject mapping (including
server:3 vs server:33), the diff rules with silenced subjects (new problem
not recorded, alerts when the window ends; already-known one carried and
not repeated; clears only after the window), window expiry and
integration/DNS-provider source matching, the failure tracker end to end
against a webhook (silent during a window while an unrelated service still
alerts; outage that outlasts the window alerts on the next failure and
only once; fail-and-recover fully inside a window sends nothing), a full
health pass against a real window, and the real router with a stubbed
session (role rules, duration bounds including the missing-duration case,
extend-not-stack, 404s, deleted targets hidden, audit entries). Real dev
database mtime untouched.
Not done: I haven't clicked through the new page or banner in a browser
(they sit behind the Authentik login); it builds and the API behind it is
tested.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New "Generator" nav item, open to every role since it's a pure
client-side utility with no data mutation. Three independent cards:
- Server name: picks from Swedish girl names or Disney characters (or
both), skipping any name already used by an existing server —
checked against the real server list, not just avoiding duplicates
within one session.
- Username: adjective+animal with a configurable separator and an
optional 2-digit suffix.
- Password: length slider, per-charset toggles, an "exclude ambiguous
characters" option (0/O, 1/l/I), and a rough entropy/strength
readout. Uses crypto.getRandomValues with rejection sampling (not
Math.random or a plain modulo), since a biased password generator
is a real security footgun.
Nothing generated here is sent to or stored on the server — it's
computed entirely in the browser and only reaches the backend if the
user pastes it into some other form themselves (e.g. Secrets, adding
a server).
Verified generators.ts directly: collision avoidance always returns
the one remaining unused name when every other option in a themed
list is taken, the full-list-exhausted fallback produces a numbered
name that still doesn't collide, matching is case-insensitive,
per-charset password generation only ever produces characters from
the selected sets, excludeAmbiguous holds across 200 40-character
samples, entropy math matches the expected log2 formula, and a
5000-sample single-character distribution came out uniform (469-521
per digit against an expected 500, no modulo bias) confirming the
rejection-sampling RNG is unbiased.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Personal, per-browser preference (localStorage), not an admin-wide
Display setting like date/time format — every role can pick their own.
Sets data-bs-theme on <html> to hook into Tabler's built-in dark
variant, applied via an inline script in index.html before React
mounts so there's no light-mode flash on load. Toggle button lives in
the sidebar footer next to Sign out.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Pagination just landed hardcoded to 20 rows everywhere; add a way to
change that instead of leaving it fixed for every table in the app.
pageSize joins dateFormat/timeFormat on the existing display settings
object (server-side default 20, 5-500 range enforced by the PUT
schema) rather than becoming its own settings section, since it's the
same kind of thing -- an admin-configured, globally-applied display
preference read by every signed-in role via the already-public GET
/api/settings/display endpoint, same as the date/time format already
works.
Renamed the "Date & Time" settings tab/page/route to "Display" (still
just one component, now covering both date/time format and table
pagination) since its scope no longer matches the old name -- kept
Settings.tsx's usual pattern of one page per concern rather than
adding a second, oddly-scoped tab just for one number field.
New web/src/utils/pageSize.ts mirrors utils/date.ts's existing
module-level "set once at startup, read anywhere without prop-
drilling" pattern; usePagination()'s pageSize parameter now defaults
to getPageSize() instead of a literal 20, evaluated fresh on every
call so it picks up a saved change without touching any of the ten
pages already using the hook.
Verified server-side against a temp SQLite DB: pageSize defaults to
20, a partial update sets it without disturbing dateFormat/timeFormat
and vice versa, and it persists across a fresh settings read. Also
checked the default-parameter mechanics directly (re-evaluates the
global value on every call rather than capturing it once, and an
explicit override still wins).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The Date & Time setting drove formatDateTime() everywhere, but the
human-readable cron description ("At 08:30 AM every day") came from
cronstrue, a separate library with its own independent AM/PM default
that the setting never touched. Pass its use24HourTimeFormat option
from the same shared setting so "Schedule" columns match the rest of
the app.
Added utils/date.ts's is24HourFormat() getter for this, since
formatDateTime() itself doesn't apply here (cronstrue does its own
cron-to-English rendering, not just time formatting).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Different tables used different date formats: Servers & Tasks used a
fixed "YYYY-MM-DD HH:mm:ss" (24h), while Audit Log, DNS, Integrations
(Tailscale/Semaphore), and Users called plain .toLocaleString() with
no options, which renders using the browser's own locale — different
per browser/OS, and inconsistent with the other pages' fixed format.
- New Settings -> Date & Time page: pick date order (YYYY-MM-DD,
DD/MM/YYYY, MM/DD/YYYY) and 12h vs 24h clock, with a live preview.
- utils/date.ts's formatDateTime() now reads these settings instead of
being hardcoded to sv-SE/24h; the setting is fetched once at app
startup (alongside /api/me) via a new non-secret GET
/api/settings/display (any signed-in user, same rationale as the
badge-color endpoints) and applied immediately on save too, without
needing a page reload.
- Switched every remaining raw new Date(...).toLocaleString() call
(Audit Log, DNS zone sync time, Tailscale/Semaphore last-seen,
Users' last login) over to the shared formatter, so every table now
renders dates identically.
Verified the formatter's date-order x 12h logic against all six
combinations plus the midnight/noon 12h edge cases, and the settings
endpoints end-to-end (defaults, partial updates, validation
rejection, audit logging) against the real dev server.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ports cron/systemd task tracking across Debian/Raspbian servers, including
the Linux push agent (install/report/uninstall scripts, rebranded from
"schedule-task-manager-agent" to "homelab-manager-agent") and the
manual-task-entry flow for things an agent can't see (Docker jobs, backups).
The schema (servers/scheduled_tasks tables) was already in place from the
foundation pass, so this is mostly a straight port of the original's
services/routes.
Deliberate change from the original: server/token management (which mints
agent credentials) is now admin-only rather than open to any logged-in user,
and manual task CRUD is gated to operator+ — consistent with how Secrets,
IPAM, and DNS already split "configure credentials" from "everyday edits"
across roles. All mutations are audit-logged.
- server/src/services/tokens.ts, taskSync.ts: ported near-verbatim (agent
token hashing, the agent-sync-marks-missing-as-stale-not-deleted logic).
- server/src/routes/servers.ts, tasks.ts, agentReport.ts: same contract as
the original (agent auth is a per-server bearer token, independent of the
session-based requireAuth used everywhere else).
- web: a single Servers & Tasks page (filter bar, task table grouped by
server/schedule type, manual task form, and an admin-only server
management panel with token reveal + copyable install/uninstall commands),
replacing the original's two separate pages/apps.
Verified: full build passes; a scripted HTTP test against a running server
covers unauthenticated access, role gating at each tier (admin-only server
mgmt, operator+ task mgmt), agent bearer-token auth (valid/invalid/rotated),
manual-vs-agent task edit protection, stale-marking on re-sync, and cascade
delete — 22/22 checks passing. Real agent installation on an actual
Debian/Raspbian host still needs to be tried on the user's network.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Monorepo (Express+TS+Drizzle/libSQL server, React+Vite+Tabler web) matching
the stack used by ScheduleTaskManager and Sloth Manager. Includes Authentik
OIDC login with local admin/operator/viewer roles (first user becomes admin),
a generalized audit log, encrypted-at-rest storage for future integration API
tokens, the DB schema for all planned modules, and the Tabler-styled app
shell/nav. Also ports the Secrets (expiry tracker) and IP Addresses (IPAM)
modules from Sloth Manager onto the new stack.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>